Typically, a single-stage booster pump is enough for one building. A multi-stage booster pump becomes useful when the requirement of water pressure is extremely high. Such applications include pumping water uphill or for a residential area containing multiple buildings, maintaining the city water pressure, and carrying water over a very long pipeline.
There may be other reasons at play worth checking before investing in a booster pump. Clogged Pipes: Clogged pipes introduce high resistance to the water flowing through them, affecting both flow rate and water pressure.
Peak Demand: When the water distribution system experiences peak demand, it results in low water pressure. However, this condition will not always stay constant. Faulty Water Meter Valve or Pressure Regulator: Both these devices play an important role in keeping the water pressure at the desired level within the water distribution line.
Any fault with these devices will likely affect the water pressure. Choosing the right booster pump is a little tricky. You should consider several factors ranging from the state of your pipelines to the desired level of pressure head to meet your requirements.
A pressure pump works in a similar way. The first step to selecting the correct pressure pump is to know what it is going to be used for;. These are important questions and factors that will influence the type and quality pump that need to be purchased. The further the water needs to travel, the more robust the pump needs to be. Secondly , you need to consider the following when purchasing a pressure pump:. Pressure pumps are typically centrifugal pumps with impellers that pull water in and pushes the water out at increased pressure.
The impeller works like a vane that rotates on an axis that pulls water in. The impellers have curved vanes, which cause the water to be pushed outwards with centrifugal force as the flow enters the pump. The pumps in the Pascali range cover a wide variety of flow rates and pressures, depending on the application that the pump is needed for. There are three main categories in the Pascali range.
Installing a pressure pump is straightforward. Pressure pumps need to be installed at the source of the water, or from where you will need to move the water from. These areas could be the main water line of the house, at the foot of a water tank etc. Pascali Pumps have been developed with homeowners in mind.
The range has been developed to address most low water pressure problems experienced by homeowners. Pascali Pumps are exclusively available from Agrinet. Having your water tested will highlight any of these issues and solutions can be put in place to remedy them.
Sometimes your water pressure problems can simply be caused by gravity. If you have a tall building, your mains water supply may be struggling to provide adequate pressure to your upper floors. Similarly, if you use a private water supply, your well pump may be struggling to distribute water around your property. In this instance, a water booster pump may be the answer. Issues like poor performing showers and toilets that fill up slowly are signs that a water booster pump may be needed.
A water booster pump is designed to aid water flow in systems that lack pressure. Typically, this is used to push water to the upper floors of tall buildings, ensuring adequate pressure on every floor. The water booster pump can be so powerful it can even allow you to use water from a well in your house instead of mains water supplies.
The size, type and number of pumps that are required will vary depending on the size of the building and also the number of users. This is something that your pump installation company will advise you of during the survey.
0コメント